JVL A/S intelligent Motors
About us
JVL is a world leader within the development and production of efficient and compact integrated servo motors and integrated stepper motors. MAC motor® are a series of integrated brushless servo motors (up to 4500 W and 13.5 kW peak) and ServoStep® are a series of integrated stepper motors (up to 25 Nm). Both the servo motor and stepper motor series include motor, controller, ePLC, encoder and bus system integrated into one compact unit. All industrial Ethernet protocols like Profinet, EtherNet/IP, EtherCAT, Sercos III, ModbusTCP and Powerlink are available.
Options include: absolute multiturn encoders, STO (safe torque off, SIL3) and brakes.
JVL has more than 25 years of motion control experience and are well known for their development and production of highly specialized integrated motors with industrial Ethernet and customized improvements. The close co-operation with customers and representatives result in cost-effective and technical optimized solutions for both basic and advanced motion control applications.
JVL's wide selection of quality products for motion control applications include: Integrated brushless Servo motors, Integrated Stepper motors, AC Servo motor controllers, Motor drivers (DC, AC and Steppers), Brakes, Gearboxes, Hollow Rotary Actuators and HMI touch panels.
Products & services
MIS231-MIS234 ServoStep Nema 23
The new motor family, ServoStep, uses the newest technology and the advancement of the previous designs, incorporating customers’ feedback. The family has the widest pallet of options in the market and will thus fit into all possible customer applications. Key features:First of all, integrated motors mean you get an all-in-one solution. In one unit you get motor, drive electronics, encoder, motion controller and an easily programmed embedded PLC with 8 I/O points onboard. The motors can operate as stand-alone units or be controlled from a master PLC or PC. The 8 I/O points can be individually configured as digital inputs, digital outputs or analog inputs. Even without options the new ServoStep motors offer some very strong features like closed-loop operation, torque control, ultra-high resolution of 409600 step/revolution resulting in unsurpassed smoothness and silent running plus a wide speed range from 0-3000 RPM with an extreme resolution of just 0.01 RPM.Power supply goes from 7 to 72 Volt DC and there are 4 pcs M12 industrial connectors for supply, signals and communications. Serial RS485 interface is standard on all motors.The family base line consists of high torque motors but if even more is needed JVL offers ultra high torque motors with up to 30% higher torque. There are ten different motors with 0.97 Nm to 3.1 Nm. Popular options include: Absolute multiturn encoders, CANopen, double shaft, hollow shaft, electromechanical brakes (front or rear mounted), better IP protection class up to IP65, special customized connectors and Safe Torque Off (STO) input. Even wireless options exist: Bluetooth, Zigbee and WLAN – ideal for AGVs and other battery supplied applications. Ready for Industry 4.0 and IIoT (Industrial IoT) All ServoStep motors can be delivered with industrial Ethernet onboard. You can choose among all major protocols: Profinet, EtherNet/IP, EtherCAT, Sercos III, Powerlink and ModbusTCP/UDP.
MAC050 - MAC141 - next generation of MAC-Motors - Generation 3
JVL Industri Elektronik A/S is proud to announce a completely new generation of Mini-MAC (50-141 W) servo motors. This new motor family is based on previous designs and customer feedback collected for many years and offers a wide pallet of options and possibilities which makes this product fit into almost any application. Key features: - High dynamic servo regulator - Industrial Ethernets - 6 protocols - Absolute multiturn encoder unlimited down time (no battery!) - Safe Torque Off (STO) input - Wide supply range 7 to 48 VDC - Very energy efficient - Brake control (ext. brake) - 0 - 4000 RPM / 50 - 140 W - Protection class up to IP67 - Wide program of option modules - Connectors: M12 industrial What is new ? • Absolute multiturn encoder harvesting technology without battery or gear • Ethernet high performance similar to other MAC motors • More advanced FOC filter for lower noise and better motor performance • New Mosfet technology for higher efficiency and cooler motor • Encoder resolution 8196 CPR. Higher resolutions soon to come • STO or Brake connector optional
MIS171-MIS176 ServoStep Nema 17
The ServoStep MIS171 to MIS176 have a NEMA17 42x42mm flange and include controller with 6 different industrial Ethernet protocols, absolute multiturn encoder, closed loop and M12 connectors. This new motor family is based on the latest microprocessor and cooling technology and an advancement compared to previous designs. All electronics in a stepper system are integrated in the motor itself and are similar to the concept used by other JVL motors, making it very easy to use in all kind of motion control stepper or servomotor applications.The motor contains everything to solve a modern control task, either as a stand-alone with own easy programmable motion controller or controlled from an external PLC or PC. 8 I/O points can be individually configured as digital input, digital output or analogue input. Modbus RTU or CANopen provide easy connections to a PLC or HMI. An ActiveX/OCX driver is available to make simple interface to LabView, Excel, VB or other Windows-programs. Up to 254 axis can be connected on the same RS485 bus. Key features: • Industrial Ethernet. 6 Protocols • Very high motor power and torque • Closed-loop operation with current control • Absolute multiturn encoder • Safe Torque Off (STO) input • High resolution 409600 cnt/rev. • Speed 0-3000 in 0.01RPM steps • Wide supply range 7-72VDC • Protection class up to IP65 • M12 or M23 connectors (M12 standard. M23 optional) Industrial Ethernet: Profinet, EtherCAT, Powerlink, EtherNet/IP, Modbus TCP or SERCOS III are available and for EtherCAT and SERCOS III synchronization and drive profiles are available. MACtalk can use Ethernet for commissioning the motor so no need for RS232/RS485 converter or additional cables. The motor has the ability to be upgraded with other protocols or newer versions of the same protocol at any time. Because of the upgradeability, the JVL Industrial Ethernet module is also ‘future proof' as newer versions of the protocols will always fit into the design.
Integrated Stepper Motors Linear Actuator NEMA17 to NEMA34
The JVL stepper motor linear actuator is available in non-captive, external linear and captive options. Captive and external linear are also available with integrated build in controller or driver.They are available in a wide variety of resolutions from x mm/rev to y mm/rev. In addition to our standard configurations can we custom design this stepper motor linear actuator to meet your specific application requirements. The range come in three sizes from 42mm to 86mm square flange NEMA17,NEMA23 and NEMA34. Key electronics features: Industrial Ethernet. 6 Protocols Very high motor power and torque Closed-loop operation with current control Very high efficiency= low temperature rise Absolute multiturn encoder Safe Torque Off (STO) input TUV approved. High resolution 409600 cnt/rev. Speed 0-3000 in 0.01 RPM steps Wide supply range 7-72 VDC Industrial Ethernet:Profinet, EtherCAT, Powerlink, EtherNet/IP, Modbus TCP or SERCOS III are available and for EtherCAT and SERCOS III synchronization and drive profiles are available. MACtalk can use Ethernet for comissioning the motor so no need for RS232/RS485 converter or additional cables. The motor has the ability to be upgraded with other protocols or newer versions of the same protocol at any time. Because of the upgradeability, the JVL Industrial Ethernet module is also ‘future proof' as newer versions of the protocols will always fit into the design. The motor is equipped with two Ethernet connectors and a built-in switch, enabling line topology without any extra expensive hardware. Several LEDs, enabling technicians and operators to get a quick status overview Closed-loop provides higher torque, faster acceleration, current control, stall free operation and quieter operation compared to more traditional step motor systems. Motor range: MIL171 and MIL176 MIL231 and MIL232 MIL341
MAC integrated servo motors MAC400, MAC800, MAC1200, MAC1500, MAC3000, MAC4500MAC3000, MAC4500
MAC - The complete solution for medium to larger power ratings. With built-in mains power supply. Choose between model with or without brake. Also in IP65 version. Choose Expansion module from an extensive selection for any application. Motor size is: MAC400-D2 400W MAC400-D5 (with built-in brake) 400W MAC800-D2 746W MAC800-D5 (with built-in brake) 746W MAC1200-D2 1182W MAC1200-D5 (with built-in brake) 1182W MAC1500-G2 - 1.5kW MAC1500-G5 (w. brake) - 1.5kW MAC3000-G2 - 3.0kW MAC3000-G5 (w. brake) - 3.0kW MAC4500-G2 - 4.5kW MAC4500-G5 (w. brake) - 4.5kW Features: Absolute multiturn encoder without battery Real-time industrial Ethernet: Profinet, Ethernet/IP, MODBUS TCP, EtherCAT, Powerlink and SercosIII 2 RS422 channels for encoder in/output and SSI encoder etc. 6IO for capture of position, interrupt, counters, enable, timer and PLC functions Expansion module you can choose between: Basic Modules Programmable Modules Field Bus Modules High Speed Multi-Axis Modules Wireless Modules Industrial Ethernet Modules
STO SIL3/PLe TÜV-geprüft für die integrierten Motoren ServoStep Größe NEMA 17-43
STO SIL3/PLe TÜV-geprüft für die integrierten Motoren ServoStep Größe NEMA 17-43 JVL bietet ab sofort TÜV-geprüfte STO-Funktionalität (Safe Torque Off) für die gesamte Palette der integrierten ServoStep Schrittmotoren der Größe NEMA 17 bis NEMA 43 an. Die STO-Funktion wird verwendet, um die Energiezufuhr zum Motor sicher zu unterbrechen. Der Motor wird dabei ohne zusätzliche Hardware in einen Zustand versetzt, in dem er kein Drehmoment mehr erzeugen kann. Die STO-Funktion ist die gängigste und einfachste antriebsintegrierte Sicherheitsfunktion. Weiterhin wir durch den STO ein unbeabsichtigtes Starten des Motors verhindert.
IO-Link for integrated stepper motors MIS
Integrated IO-Link - fast and easy! Optimize factory automation with IO-Link, a cost-effective alternative to traditional Ethernet-based systems. Integration into Siemens and Rockwell PLCs is significantly simplified with IODD, AOI, and function blocks. Thanks to conformance-tested features such as data storage, event handling, diagnostic data, and block parameters, IO-Link offers a reliable and efficient solution for modern automation systems. Furthermore, the direct connection to any IO-Link master enables fast communication with a response time of less than 1 millisecond. Leverage the advantages of IO-Link for efficient and future-proof automation!
MAC802, MAC1202, MAC1403 – Niederspannungs-Servomotoren (12–60 VDC) mit integriertem Ethernet-Interface
The MAC802, MAC1202 and MAC1403 represent JVL’s new generation of integrated DC servo motors. Designed for low-voltage operation from 12–60 VDC (typically 24–48 VDC), they combine motor, controller, power electronics and encoder in one compact unit. This significantly reduces cabling, cabinet size and installation time. Performance data: MAC802: approx. 750 W continuous power, 2.4 Nm nominal torque, up to 7.2 Nm peak, length approx. 156 mm. MAC1202: approx. 1180 W continuous power, 3.82 Nm nominal torque, up to 11.46 Nm peak, length approx. 190 mm. MAC1403: approx. 1500 W continuous power, 4.78 Nm nominal torque, up to 14.34 Nm peak, length approx. 200 mm. Peak power can reach up to 4500 W depending on the model. The speed range is 0–3000 RPM (max. 3600 RPM). Key features: Fully integrated design with built-in servo controller, power stage and battery-free multi-turn absolute encoder. Support for multiple industrial Ethernet protocols such as EtherCAT, Profinet, EtherNet/IP and Modbus TCP. Integrated ePLC for standalone, decentralized motion and application control inside the motor. STO safety function (Safe Torque Off). Robust industrial housing with IP55, optional IP66/IP67, and M12/M16 connectors. Wide selection of interface and option modules: RS485, traditional fieldbuses, digital I/Os, CANopen, IO-Link, wireless extensions and more. Application advantages: With their decentralized architecture and compact, all-in-one design, these motors are ideal for compact machinery, mobile or battery-powered equipment, and modern Industry-4.0 systems. They help to reduce wiring complexity, improve EMC performance and simplify installation.
Integrated Servomotor MAC404, MAC804, MAC1004, MAC1404 with built in Ethernet Interface and ePLC for supply voltage 115/230 VAC
The integrated servomotors MAC404, MAC804, MAC1004 and MAC1404 represent a powerful generation of AC servo motors with built-in Ethernet interface, integrated ePLC, and battery-free absolute multi-turn encoder. All models operate directly from 115/230 VAC and combine motor, power electronics, controller, encoder and communication in one compact unit. This significantly reduces wiring effort, cabinet size and installation time. The power range spans from 400 W (MAC404) up to 1500 W (MAC1404), with peak power levels reaching up to 4,500 W. All motors offer a speed range of 0–3000 RPM (max. 3600 RPM) and deliver nominal torques from approx. 1.3 to 4.8 Nm with peak torques exceeding 14 Nm, depending on the model. Various flange sizes and motor lengths are available, with optional integrated brake. Protection classes range from IP55 to IP66/IP67, combined with robust M12/M16 industrial connectors. Key features across the entire series include: integrated Industrial Ethernet interfaces (e.g., EtherCAT, Profinet, EtherNet/IP, Modbus TCP), built-in ePLC for decentralized automation directly inside the motor, STO safety function (Safe Torque Off), battery-free absolute multi-turn encoder, flexible option modules such as IO-Link, RS485, CANopen, wireless extensions and additional I/O modules. Thanks to their fully integrated architecture, the MAC motors are ideal for compact machines, modular systems, robotics, packaging equipment, handling systems and any application requiring high performance in a minimal footprint. Their combination of power density, simple installation, wide protocol support and decentralized intelligence makes them one of the most versatile AC servo solutions for modern Industry 4.0 environments.