Exhibitor products

iST offers a broad range of humidity sensors and modules for reliable environmental measurement in automation applications. The portfolio includes fully calibrated humidity and temperature modules as well as capacitive humidity sensors. Our solutions stand for high chemical resistance, stable performance at high humidity levels, integrated temperature measurement, mechanical robustness, and extremely low drift, enabling precise, long-term reliable automation and process control.

Mit HyBlade®, einer innovativen und derzeit einzigartigen Hybrid-Struktur für Ventilatorschaufeln, definiert ebm-papst die Stärken großer Axialventilatoren neu! Dabei sorgt die Verbindung einer Aluminium-Trägerstruktur mit einer Hülle aus glasfaserverstärktem Kunststoff nach aerodynamischen Kriterien für völlig neue Maßstäbe. Vor allem ermöglicht die strömungstechnisch optimierte Form enorme Geräuschvorteile bei noch höheren Wirkungsgraden gegenüber herkömmlichen Flügeln.

STOBER has further developed its One Cable Solution (OCS) in cooperation with encoder manufacturer HEIDENHAIN and launched the next generation on the market. With the future-proof HEIDENHAIN EnDat® 3 protocol, the new hybrid cable can reliably connect motors and drive controllers at a distance of up to 100 metres. The user receives a complete system consisting of synchronous servomotor, cable and matching drive controller. To connect a motor to a drive controller, two cables are usually used: one transmits the encoder data, the other the electrical power. With OCS, a hybrid cable takes over both tasks. With small weak points: If the encoder and drive controller are further than 15 metres apart, the data can no longer be transmitted without interference. In this case, one output choke per cable becomes necessary. This component is expensive and requires additional space in the control cabinet. Since chokes generate heat, appropriate cooling is required. STOBER has solved these problems in cooperation with HEIDENHAIN: They have further developed the already existing STOBER single-cable solution and optimised it especially for highly dynamic applications in drag chains.

Switching of high inductive and capacitive loads The hybrid relay RK 3070 from the POWERSWITCH series is used to switch inductive or capacitive loads, for example energy-saving and LED lamps or switching power supplies with high inrush currents. A triac switches on at the zero crossing of the AC voltage. The continuous current is then conducted via the parallel-connected relay contact, thereby minimising power loss. This combination allows high inrush currents to be switched without contact bounce or arcing. This ensures a significantly longer service life. Typical areas of application are in the automation and process industry as well as in wind turbines. - Long service life due to hybrid technology - Space-saving with a width of only 17.5 mm - Load current up to 20 A

The reliability of hydraulic and pneumatic components is strongly dependent on the deployed sealing systems. The requirements sealing systems have to meet in this context are varied. They depend on the medium in place, the pressure and temperature conditions, the reciprocal movements and the chosen construction type of the component

BW Service AG has extensive experience in the maintenance and repair of hydropower plants and can offer you the know-how and expertise you need to keep your plant running smoothly. From turbines and butterfly valves to ball valves and beyond, we have the knowledge and experience to keep your hydropower plant running at peak efficiency.

Hygiene concepts must be Tailor. Whether complex built buildings or even simple family houses. Each building was designed and built under complex requirements. The Miteinbezug of processes, objectives of the user community and the emotion that should arise upon entering, make the construct unique. So it is with the inner life. Many forget that mechanical ventilation systems were designed and installed exactly as the specific project, such as the construction project itself. Challenge of the service lies in the Individualitätsbetrachtung. Commodity is past. (Karin Bucher, hygiene inspector Kat. A to 6022) What if ... You could make an object? Our hygiene concept, you have the chance. Our team develops an individualized program adapted to the current state, the needs of your plants, the need for their maintenance and a reliable cost ceiling. The planning, administration, preparation and order processing is based on an automated process, we check for you. Of course only if you want. Interested? Karin Bucher tells you more accurate.

The visually appealing stainless steel Panel is ideally suited for use in hygienically demanding areas such as the food industry and pharmaceutical production. In order to produce impeccable food and medication, high hygiene standards must be met GMP requirements are met. The well thought-out design without joints and edges and the use of hygienic screws make cleaning easier. The beveled, smooth surfaces and rounded edges of the Automation Hygienic Panel allow liquids to drain off unhindered and prevent dirt and bacteria from settling. Thanks to sophisticated cooling, the completely closed system works completely without fans and ventilation slots. Due to the housing construction according to protection class IP69, no liquids or dust can penetrate the device. The Touch Panel with hygienic design meets all the requirements of the EHEDG for more hygienic design Machines and is CE certified. All materials that can come into direct or indirect contact with the products are FDA-compliant and withstand the use of typical cleaning agents, disinfectants and high-pressure cleaners. This means that the Panels are also suitable for use in GMP-regulated areas.

What is Unified Operations Center? From data streams to video feeds, from OT to IT to ET, convergence is key to making sense of a growing amount of diverse information assembled from across the business. With AVEVA Unified Operations Center, you can converge and visualize a combination of production metrics, maintenance analytics, engineering documentation, financial performance or anything in between. This data-derived intelligence links questions and answers with action, so teams can collaborate to solve enterprise-impacting problems quickly.

Robust, compact and extremely versatile - also featuring an impressive new drive concept Oil-free reciprocating compressor with variable-speed drive motor, which always delivers the exact amount of compressed air actually required for the application. With i.Comp TOWER T versions, compressor block, air receiver, refrigeration dryer and SIGMA CONTROL 2 controller are all housed together within one complete turnkey package. Technical parameters for i.Comp TOWER and i.Comp TOWER T: Pressure: 11 bar Displacement: 404 to 570 l/min Drive motor rated power: 3.1 - 4.2 kW Ideally suited to trades, industrial, workshop and laboratory applications, as well as the pharmaceutical and food & beverage industries. The benefits Power and endurance: Thanks to its unlimited switching frequency, the i.Comp 8 / 9 is a true endurance runner. Even the harshest conditions, with ambient temperatures as high as +45°C, are just a walk in the park Quiet and clean: With a maximum sound pressure level of 65.7 dB(A), the i.Comp 8 / 9 is incredibly quiet, thanks to its exceptionally smooth-running compressor and sound-insulating PE enclosure. Space-saving installation: Thanks to its compact dimensions, the high-performance i.Comp 8 / 9 TOWER (T) has an overall footprint of less than 1 m².

Specially designed for trades applications No matter what the project or which construction job is nearing completion - you have a reliable partner by your side with the i.Comp 3. The i.Comp 3 provides you with a versatile and dependable supply of oil-free compressed air at all times. This flexible all-rounder can be taken anywhere thanks to its low weight and space-saving, compact design. The i.Comp 3 is available with the following performance specifications: Constant pressure up to 11 bar Flow rate up to 160 l/min Your advantages No compressed air receiver required The variable speed motor eliminates the need for a compressed air receiver. Oil-free compressed air The oil-free compression system eliminates the need for oil level inspection and oil changes. Constant pressure Even with cable lengths of 150 metres, the i.Comp starts up easily to deliver constant pressure of up to 11 bar.

Maximum efficiency in the control cabinet Complete your projects with maximum performance. u-remote speeds up your installation process and gets your machines up and running faster. Thanks to the fully pluggable system, you can rely on intuition and error-free operation. Score points with your customers with maximum machine and system availability. u-remote is the most user-friendly I/O concept on the market, with which you can combine powerful automation with optimal system handling. This gives your machines an impressive range of functions that significantly minimizes the effort required for commissioning and maintenance.

Introducing the i4H, OMRON’s newest SCARA robot Achieve more by seamlessly integrating the robust i4H into your production line today. Unique features enable OMRON’s latest SCARA line to meet today’s demands of mass customization. It also allows manufacturers to produce high mixes of products at low volume which provide a wider array of goods to people. Key features −15 kg payload capacity. − 650, 750, 850mm reach options − Standard & Long Quill lengths − Visual display on base − Health lighting indicators

The i650 motec frequency inverter for wall mounting and motor mounting in protection class IP66 (UL Type 4X indoor) is the optimal decentralized drive solution. The inverter can be extended for universal use with an extension box with disconnect switch with/without Type E combination motor controller and operating elements. The i650 motec frequency inverter stands out from the i550 motec due to its extended range of functions: For simple automation tasks, a logic PLC based on CODESYS in accordance with the IEC 61131-3 standard is integrated in the i650 motec. Table positioning is available for the realization of independent axes and machine modules. The “Extended Safety“ option (safety technology with various functions) rounds off the overall package. The requirements of the Ecodesign Directive, Standard EN IEC 61800-9-2, are met. Application areas: Conveyor drives, traveling drives, winding drives, hoist drives, extruders, packaging machines, pumps, fans, ... Highlights: - Compact solution for decentralized drive technology, wall-mounted or motor-mounted, with high protection class IP66 (UL Type 4X indoor) - Wall-mounted expandable: Extension box with disconnect switch with/without Type E combination motor controller and operating elements - Fast mounting due to pluggable, standardized connections (plug & play) - Four IO-Link ports with limited IO-Link master functionality for easy data exchange between IO-Link sensors and actuators - Integrated regenerative module for very high energy efficiency - a brake resistor is no longer required - Extended range of functions: Logic PLC Table positioning "Safe Torque Off (STO)" via CIP Safety

The new 5G router ICG-2515-NR is the perfect choice for all demanding, future-oriented mobile communications applications. Even if a 5G network is not yet available and the router still has to do its daily work in 4G LTE mode, a reliable and future-proof mobile communications infrastructure is a basic requirement for time-critical or data-intensive remote access, M2M and IIoT applications. With its 5G NR (New Radio) technology and the 4 antennas, the ICG-2515 NR offers a maximum speed of 4 Gbps downstream and even in 4G LTE mode more than 1Gbps can be reached, so that the data can be sent to one of the 4 gigabits End devices connected to the LAN ports (RJ45) can also be communicated with the mobile network at full LAN speed. The router is equipped with dual SIM for uninterrupted connectivity and can be configured redundantly with automatic failover. Alternatively, the Internet connection can also be established via the RJ45 gigabit WAN port. The extensive security functions include IPSec, VPN (max. 60 connections), AES encryption and SHA-256/-512 authentication. The integrated SPI firewall offers protection against DoS/DDoS attacks and virtual server and DMZ functions ensure secure access to intranet resources. If the tried-and-tested 4G LTE standard is completely sufficient and you don't necessarily have to be at the top technologically - or in terms of price - then the 4G LTE cellular router ICG-2510-LTE-EU has all the properties required for reliable Internet communication will. Thanks to the DIN rail mounting, the 24VDC power supply and the wide temperature range from -40°C to 75°C, the routers are recommended for all applications in an industrial environment.