Exhibitor products

AGRO Progress® metal cable glands can be used with confidence for any rolling stock application, in any arrangement, as has been recently certified.

Case Studie Autonome Transportsysteme

The AI-based Turck Intelligent Vision (TIV) camera learns from images instead of requiring complex programming, reliably detecting patterns, differences, good and defective parts, as well as various object classes. It operates robustly under varying lighting and positional conditions and delivers precise results. Commissioning is quick and requires no expert knowledge. As an all-in-one solution, the TIV processes data directly on the device, without additional hardware or ongoing costs. This enables efficient and flexible quality inspection. - Quick commissioning without programming - Stand-alone solution with IP67 protection rating, no additional edge hardware required - Real-time results, scalable through transferable networks - One-off investment – no ongoing software licence costs

Artificial Intelligence | AI – especially the subfield of Machine Learning (ML) or Artificial Intelligence (AI) – is conquering more and more areas of our everyday lives. The ability of these algorithms to learn independently from data sets opens up new horizons. AI algorithms are ahead of humans, especially when it comes to evaluating big data and searching for ‘hidden’ patterns. Read more about expertise on our expert blog or on our expertise page 🔗 https://www.imt.ch/en/expert-blog-detail/ai-embedded-devices-en 🔗 https://www.imt.ch/en/artificial-intelligence

TwinCAT 3 CoAgent from Beckhoff provides support as an AI - based assistance system with dialog-oriented interaction. This was previously focused on software engineering, but can now also be used directly in machine operation.

When a fault occurs, every minute counts. Yet typing detailed fault reports takes time, and important information can easily be lost. With AI-powered Voice-to-Ticket, employees can report faults directly at the machine using their voice. An AI agent automatically creates a structured ticket with all relevant information for the maintenance team. Discover how voice-based ticket creation simplifies maintenance processes, improves documentation, and helps reduce response times.

AI gives you precise insights into the condition of your machines and systems. Our powerful routers and gateways enable direct processing of machine data through edge computing – for real-time analytics, minimal latency, and maximum security. Errors and deviations are detected immediately, allowing processes to be efficiently optimized. Ideal for Industry 4.0 and demanding IoT applications! With the AI experts at Coderitter GmbH, we develop a customized AIoT solution for you that optimally combines sensors, firmware, and AI.

The pneumatic screwdrivers can be purchased with a straight handle, pistol handle or angle handle. They have the following specifications: - Patented TRACS2 torque control system ensures high repeatability and vibration levels below 2.5 m/s2 - Convenient end-of-cycle audible signal - Light weight due to light metal materials - With tool holder connection (spring balancers) - Safe, practical and accurate coupling adjustment system - Designed for exhaust to direct air away from the operator. - Manufactured from recyclable materials. - OIL FREE, screwdrivers operate at maximum performance without the need for air lubrication. This provides an oil mist free workplace.

The AirSTREAM wiring system works according to a new design principle and stands out thanks to the many assembly and operation benefits. AirSTREAM is the core piece of the control cabinet The strong aluminium frame of the AirSTREAM for state-of-the-art control cabinet installation and wiring, is very compact because the wire guide is integrated into the frame. AirSTREAM helps to design the control cabinet so that the air can circulate better and hot spots can be avoided. The separation into an installation level and a wiring level means that the air can flow past modules and wires virtually unobstructed- removing dissipated heat quickly. The wiring and air guide elements are integrated into the AirSTREAM frame to ensure free convection and cooling of the wires, All the wiring in the AirSTREAM is installed easily from the front. And cable ducts do not interfere with circulation. Dispensing with cable ducts allows the compact installation of several components within narrow dimensional constraints. Also, cooling air always circulates the components and reliably discharges generated heat.

AirSTREAM Compact is used in small and compact control cabinets, which are often reduced in depth. The flexible design generates more space in the control cabinet and helps to save lots of time when wiring, mounting and dismantling. Differences to the classic AirSTREAM system The rail profiles on the AirSTREAM Compact are not assembled with brackets but with supports. These stand off supports are available in various lengths to accomodate different application depth requirements. Front wiring The wires are routed over the combs toward the back before being laid laterally across the supports from top to bottom. Easy mounting of larger components The adapter rails are used for fitting surface mounted inverters or other components that are mounted with screws. Additionally some mounting rails have an integrated sliding nut channel that accommodates surface mount components. The advantages at a glance - Slide nut channel with new AirSTREAM stampSlide nut channel with new AirSTREAM stamp - Edge protection (KHS): All rail profiles are supplied with matching edge protection. - Mounting rails (RG 20): Can be used as a mounting rail or as an adapter rail, high flexibility. - EMC accessories: For supporting shielded cables. The EMC accessory is used instead of a comb profile. - Adapter rails (RG 35): With edge protection. - The angle adapter (KSS): is used to align DIN rails on a slant e.g. when using clamps. Attachment on all rail profiles. - Comb variants: A variety of comb sizes are available depending on requirements. Combs can be replaced easily. - Sliding nut variants: All rails are equipped with a sliding nut channel (can be built over on every level). - Hook and loop adapter (KBS): The UL-certified hook and loop adapter enables time-saving and careful attachment of wires, cables and hoses. Various versions - EMC rail: The EMC rail serves as a support for shielded cables.

The solution from autosen. The AL001 laser distance sensor supports you with best performance in particularly challenging position and level detection tasks – in all applications where red light sensors cannot be used for constructional reasons. With an operating range of 0.2 to 10 m, background suppression of >10 to 100 m and two programmable switching outputs (optionally as analogue output 4…20 mA / 0…10 V), the AL001 is perfect for position detection of distant targets and for accurate position control in material supply. Visible laser light (laser protection class 2), IO-Link, protection rating IP67 and an M12 connection complete the profile. The 4-digit alphanumeric display and programming keys make operation and parameter setting particularly easy. Practical applications include part/no part verification in demanding environments, material and component feed, level control and detection, and precise laser position detection. Tried and tested millions of times in daily use: autosen laser distance sensors are manufactured in Germany to the highest quality standards in terms of robustness, noise immunity and reliability – with a 5-year warranty and money-back guarantee. Note: When used with an analogue output, use exclusively sensor cables without LED.

Germany's most successful trade fair series for industrial automation, robotics and digitalisation is coming to the capital! At all about automation, users and decision-makers will meet with manufacturers of automation components and systems, suppliers of robotics solutions, integrators, software providers, service providers and distributors. In the most pleasant trade fair atmosphere, suppliers and users design solutions on the way to flexible automation and smart production - true to the all about automation motto: regional. compact. competent. Next date: 27. + 28. Jan 2027

The traditional heart of Saxon industry beats in and around Chemnitz. Mechanical engineering and automotive engineering are firmly anchored in the region. Exactly the right location for all about automation in eastern Germany. <b>Next date:</b> 23. + 24. September 2026 15. + 16. Sept 2027

Manufacturers, distributors and service providers of industrial automation networked with users from NRW at the all about automation in Düsseldorf. <b> Next date:</b> 14.+15. October 2026 13. + 14. Okt 2027