Exhibitor products

The demand for outdoor cabling solutions is growing inexorably. This is due to modern network and IP interface technologies, which are essential for digitalization. They enable the networking and deployment of surveillance cameras, sensors and digital traffic signs, as well as wireless access points. Our MCO IP69k protective housings provide reliable protection for your permanent outdoor connections. They are not only completely dust and waterproof, but also resistant to ozone, UV radiation and salt water. They also withstand high temperatures, strong vibrations and high-pressure jet cleaning, providing reliable protection against external interference. The flexible and easy-to-install solutions have been specially designed to accommodate and protect field-terminated cables, pre-terminated patch cables and fiber optic connections. Flexible & reliable Our universally applicable protective housings for outdoor applications are available in three different versions and cover all conceivable applications in your practice. The three variants of the protective housings have been specially designed for free installation, as well as for wall, top-hat rail, quick and pole mounting. In addition, we also offer a solution for wall or housing feed-through. Thanks to the adapter plates included in the scope of delivery, countless combination options are possible, with various modules, plug-in connectors and cable connectors. Regardless of whether it is a matter of accommodating and protecting field-assembled cables or pre-assembled patch cables and fiber optic connections.

MDM rotary tables are free programmable and can therefore be used very flexibly. The integrated torque motor works without mechanical transmission elements and, in combination with the high-resolution measuring system, achieves very high accuracies and short switching times. All MDM rotary tables are completely maintenance-free and extremely quiet. Integrated high-capacity bearings allow heavy loads, especially for pressing processes directly on the rotary table. In contrast to rotary indexing tables with fixed positions, MDM rotary tables can be flexibly reprogrammed to any position. - Rotary table with integrated torque motor, as MDM flat in extra-flat design - High-resolution BiSS absolute encoder (20-bit MDM, 24-bit MDM flat) - Highly dynamic, rigid and quiet rotary movements - completely maintenance-free - MDM: 6 sizes 135mm to 360mm with 3 to 330 Nm continuous torque - MDM flat: 3 sizes 135mm to 230mm with 3 to 12 Nm continuous torque - Plug & Play integration with Parkem and Beckhoff AX servo drives for MDM (without flat)

Benefit from our decades of experience with measuring and testing machines.

The quality requirements for technical components are constantly increasing worldwide. Material defects and production downtimes lead to considerable financial disadvantages for our customers. Thanks to our extensive experience in the construction of various testing systems, we can offer the perfect solution. Whether simple optical tests or complex performance tests of actuators - our customers always receive the optimum solution. Depending on requirements, our test systems can either be used as stand-alone systems or integrated into the manufacturing and assembly process. Customized testing systems for specific customer requirements: Extensive test spectrum: 20 years of expertise in test stand construction Test sequences and measuring systems tailored to customer requirements Comprehensive data acquisition and archiving for complete traceability Remote support for fast and efficient problem solving

The "Perforex" drilling and milling machining center enables us to produce tailor-made blanks to customer specifications. Highly precise and efficient. The processing data have to be transmitted on EPLAN Pro Panel. If required, we can prepare the data on our EPLAN Pro Panel according to your drawing template. Contact us for your customized offer.

A 1 m long telescopic rail, loadable with 500 kg.An antibacterial handle for a medical application... Requirements for mechanical components can sometimes be complex. That's why we offer more than just suitable products. Coordinate your design with our solutions. So you can move forward smoothly.

Mit OPTIME können Sie Hunderte Aggregate innerhalb weniger Stunden überwachen. So wird Condition Monitoring einfach, schnell und kosteneffizient. Das erweiterbare System funktioniert für beinahe alle Aggregate und erkennt potenzielle Schäden, Unwuchten und fehlerhafte Ausrichtungen bereits Wochen im Voraus.

Mechatronics combines mechanical precision with smart electronics and intelligent software. From initial concept to the serial-production-ready product, we create high-performance, customised systems - efficient, networked and future-proof. - Mechanical design & product development - Hardware and electronics development - Embedded software & system integration

für 4 Schlösser + 1 Langschlitz, aus Stahl, Rückseite natur (trommelverzinkt), Vorderseite rot pulverbeschichtet mit weissem Schärer+Kunz Logo, Nieten rostfrei, allg. Baustahl, DIN 1.0570 / ST52-3 (S355J2G3)

In many production plants, manual production data acquisition (PDA) is often a time-consuming and error-prone process. There is often no clear and quick feedback on the quality of the products and the efficiency of the production lines. This leads to delays, increased scrap rates and difficulties in identifying and correcting errors in production. Production management and employees often struggle to identify problems in real time and make the necessary adjustments, which ultimately affects overall productivity and product quality. With Peakboard, you can overcome these issues and optimize your production processes with accurate, real-time data from your quality control. Our interactive application for manual production data acquisition (PDA) is an effective solution for your logistics or production. Employees in quality control can enter information on inspected items directly via a user-friendly touchscreen at the workstation or on a mobile tablet. After logging in, employees are taken directly to the overview. Here they can clock in, clock out and enter breaks. An overview of individual performance data is displayed on this screen, including machine running time and product comparison. In addition, the screen provides a clear overview of the current orders, which are processed one after the other. The reasons for rejects are recorded on the second screen. If an article is free of defects, this is confirmed by pressing the “OK” button. For items with quality problems, the defects can also be specified in detail. On the third screen, the application immediately shows you the quality of the items produced, both in real time and over a longer period of time. This information helps to quickly identify problems, such as a high number of defective parts, so that production processes can be optimized immediately.

Metal construction not only processes metals, but also combines them with non-metals. The focus is on steel processing, especially hot-rolled structural steel and stainless steel. Aluminium is used for the construction of windows, facades and occasionally railings. The composite material of plastic and glass is used in building construction for the manufacture of windows, conservatories and railing systems. We will be happy to discuss your requirements with you and submit our proposed solutions on three-dimensional drawings. As a supplementary service, we will also prepare the necessary building applications with the complete documentation. We offer a wide variety of curtain wall balconies for detached houses and apartment buildings.

The MG80 modules offer high speed processing (400µs) of all axis values and calculations. Depending on the communication protocol needed, the matching module can be chosen: 　 ●　Ethernet (TCP/TP) 1000BASE-TX: MG80-NE ●　EtherNET/IP: MG80-EI ●　PROFINET: MG80-PN ●　EtherCAT: MG80-EC ●　CC-Link: MG80-CL Possible linking of: ●　4 interface modules of MG80-NE ●　255 interface modules of MG80-EI/PN ●　65,535 interface modules of MG80-EC ●　21 interface modules of MG80-CL Further, up to 16 MG80-CM counter modules can be connected to each of the MG80 network interfaces. ●　Transmission speed of 100Mbit/s ●　Current value / MAX / MIN / P-P output ●　Easy mounting on 35mm DIN rail

●　Data transferring without PLC programming with PLC link ●　Compatible with PLC manufactured by Mitsubishi Electric, OMRON and Keyence ●　Up to 16 MG80-CM counter modules can be connected to MG80-SC ●　Current value / MAX / MIN / P-P output ●　Easy mounting on 35mm DIN rail

Intelligent, compact and freely programmable motor controller Brushless rotary and linear motors, voice coils and DC brushed and stepper motors Motor supply / logic supply: 7 – 48 VDC / 6 – 48 VDC Output current: 5.6 A (4ARMS) nominal; 14 A (10ARMS) peak Communication via RS232, USB + EtherCAT (CZ-CAT) or CAN/CANopen (CZ-CAN) Size (L x W x H): 38.1 x 25 x 9.5 mm

Intelligent, ultra compact and freely programmable motor controller Brushless rotary and linear motors, voice coils and DC brushed and stepper motors Motor supply / logic supply: 7 – 48 VDC / 6 – 48 VDC Output current: 4.2 A (3ARMS) nominal; 14 A (10ARMS) peak Communication via RS232, USB + EtherCAT (MZ-CAT) or CAN/CANopen (MZ-CAN) Size (L x W x H): 38.1 x 25 x 9.5 mm