Exhibitor products

The SFD (Sublimated Forward Acting Rupture Disc) is a versatile rupture disc solution suitable for use with a wide range of process conditions. Manufactured using Contour Precision Lasering, this forward acting rupture disc eliminates common industry concerns associated with mechanically scored discs such as premature failure, corrosion on the score-line and pin-holing. Unexpected problems can cause costly downtime, REMBE®’s CPL™ Technology maximises the lifetime of the installed disc and ensures high-quality, accurate burst control even in the harshest of environments.

Planetary gearhead Series 26/1R and 32/3R. FAULHABER extends its new Series R metal planetary gearhead portfolio beyond the existing 20/1R by introducing the new 26/1R and 32/3R Series gearheads. These new products with 26 mm and 32 mm diameter represent the evolution of previous 26/1 and 32/3 gearheads maintaining the same geometry to guarantee mechanical compatibility with their predecessors. As outcome, the output power available for impulsive cycle operation has been more than doubled compared to the previous generation. Such performance improvement were made possible through deep design analysis, extensive testing and meticulous validation. 26/1R and 32/R significantly improves the input speed by achieving continuous input speed respectively up to 9000 rpm and 8000 rpm, resulting in an impressive 100% increase. In intermittent operation conditions, the input speed can reach up to 10000 rpm and 9000 rpm to exploit at best DC or Brushless motor capability. Maximum output torque has also been enhanced to exhibit up to 4 Nm and up to 8 Nm in continuous operation. The gearheads are available with one to five stages, and the span of the 13 possible reduction gear ratios ranges from 3.7:1 to 1526:1. The output shaft has no axial play thanks to the preloaded ball bearing. They are able to operate in the typical temperature range conditions of -10°C to +125°C and options are also available for lower temperature like -45°C to +100°C. 26/1R and 32/3R can be combined with many motors using various technologies like DC motors, brushless motors and stepper motors with diameter starting from 23 mm up to 35 mm.

Particularly at the site of value creation, you can use digitalization to create new milestones in the continuous improvement process within your company. After all, standardized, digital visualization systems not only ensure a transparent exchange of information, they also make communication more efficient. With Peakboard, you can communicate real-time information from various data sources directly on a dashboard for managers and executives to see. This means that everyone knows the state of the process, uniformly, across all departments, and in real time, so important information is not lost anymore. Transparent system of key figures in production Often, key figures and analyses are arduously collected, printed, and handed out in the classically analog way. As a result, most of the information is already outdated before your staff even receives it. Peakboard gives you a simple and scalable solution that allows you to implement your digital shop floor management board in just a few easy steps. Link and communicate complex data between MES and ERP systems and IoT machine data – in real time! This way, you always have a clear overview of your operational processes. Create clear and concise monitoring of your key figures from production, such as OEE, downtimes, scrap rates or cycle times View key figures, daily targets, and progress in real time Use Peakboard Hub to store your data so you will be able to analyze and evaluate it afterwards

Pushbuttons, selector and key-operated switches, signal lamps and emergency stop switches with various contact type combinations are available. The interchangeable labels on the push-buttons can be printed in one or more colors.

SIA Connect is a protocol and edge gateway as well as a data logger in one device.

ATOM is a compact and particularly robust, highly coded RFID interlocking switch with safety interlock for applications up to PLe (Cat. 4). The metal housing and the large holding force is particularly suitable for heavy industry. The self-centering actuator allows sufficient error tolerance in all directions of movement on swing or sliding doors. In addition, the open head construction made of stainless steel prevents dust, dirt or corrosion from impairing the function of ATOM. The ATOM safety interlock can also be used in applications with dangerous overrun of the machine. The OSSD outputs allow multiple switches to be connected in series without masking faults. The large LED under the switch clearly shows the operating status from all directions.

Stay at the pulse of Switzerland’s technology industry and never miss important developments again. With the swissT.net newsletter, you receive regular updates, exciting insights, and relevant news directly from the network. Sign up now and benefit from valuable industry knowledge, events, and exclusive updates – compact, relevant, and delivered straight to your inbox.

Signal lamps are used for status indication or as warning device everywhere in factories on machines, conveyors and installations. ifm’s innovative signal lamps offer several advantages over conventional signal lamps and are therefore suitable for demanding applications.

The signal lights are available in diameters of 35 mm and 55 mm and can be optionally equipped with a siren. These ideally complement the existing Kübler products and enable quick and easy signaling of the measured values in the traffic light colors green, yellow or red, and thanks to the preconfigured logic, they can be combined quickly and easily with the Kübler sensors and displays.

Traffic light with flashing or steady light Optional siren with sound Can be combined with Kübler IO-Link products

Colour-coded signalling and high-quality lighting play an increasingly important role in providing simple and clear visualisation of machine states and processes. Bachofen supports you in selecting the most suitable solution. - Application-specific configurable colour indicators - Configuration via software or IO-Link - Clear signalling through well-designed concepts and good visibility in daylight - Vibration-resistant and durable; no protective housing required in harsh environments

Automatic lubrication - reduction in costs Using simalube pays off in many ways. Manual lubrication is no longer required. As a result of the time saving alone, costs are considerably reduced and manpower resources are freed up for profitable tasks in the value chain. With manual lubrication, bearings are usually over- or under-lubricated, which causes them to overheat (or dry up), resulting in mechanical failure and unplanned downtime. The simalube lubricator ensures reliable and even application of lubricant, resulting in less damage to bearings and longer machine operating times. The simalube closed system prevents any penetration of dirt. This extends the service life of the lubricated components and ensures reliable operation of the equipment. And last but not least, no lubrication points are overlooked or forgotten. Versatile use The dispenser can be used easily in all industry sectors. Water treatment plants, the automobile industry, chemical plants, foodstuffs manufacturers, underground mines and even hospitals and clinics trust in the Swiss lubricator. There is also a vast range of possible applications: conveyor belts, fans, motors, pumps, cooling and heating units, chains and guides are all reliably supplied with grease or oil by the Swiss lubricators. simalube works upside down and even under water. Its operating temperature range is from -20 °C to +55 °C.

The simalube IMPULSE connect is the latest generation of the pressure booster from the simalube family. The proven functions of the IMPULSE have been supplemented with the option of connecting the device to a smartphone via Bluetooth®. In connection with the newly developed «simatec world of maintenance» app, the devices can be easily configured and then monitored without having to be directly at the lubrication point. Information such as general status, fill level, lubricant, size, start and change date etc. is displayed to the user and easy to read in the app.

simatec ag is an independent, internationally operating family-owned company based in Wangen an der Aare, Switzerland, and has been managed by Mischa N. Wyssmann, the second generation of the family, since 2005. Since the company was founded in 1983, motivated employees have been developing and producing innovative products for the maintenance of rolling bearings. Globally renowned brand names such as simatherm, simatool, and simalube originate from simatec.