Exhibitor products

Reduce costs with simatherm Investing in a simatherm induction heater pays off in a number of ways. Within seconds, a roller bearing is gently heated to the required mounting temperature. This results in a huge saving in time, energy and money compared with previous heating methods such as oil baths, heating plates or ovens. A component is heated to the preselected temperature, where it is maintained using the keep-warm function, which means that it is never overheated and is ready for mounting at any time. A further advantage is that the temperature of the components is monitored using a temperature sensor and displayed on the unit. Fast heating possible The recommended heating temperature for mounting roller bearings is 110°C. With average bearing sizes, this temperature is reached after a matter of seconds, which saves both time and money. Besides heating bearings, however, simatherm units can also be used to heat other circular metal components such as gear wheels, flanges, bearing rings, pinions, etc. Temperature monitoring allows components to be warmed to a maximum of 250°C. Depending on the material and dimension of the components, they can even be heated to 400°C in time mode. Easy mounting The compression force required for mounting increases considerably as the bearing size increases. If the heat expansion of the metals is utilised, it is possible to mount bearings and other circular components on a shaft or in a housing without exerting any force. When heating a component, the simatherm unit remains cold and is therefore safe to touch. Plastic seals and lubricant also do not become hot. This also allows pre-lubricated bearings to be heated, which is a unique advantage of simatherm units. The grease is not damaged when the bearings are heated, and the latter can be mounted as soon as the preselected temperature is reached.

sf elektro-engineering ag verbindet mit der Firma Siemens eine langjährige Solution-Partnerschaft für Automation, Cranes und Drives. Bezüglich SPS decken wir S5 bis hin zu den modernsten Familien der S7 mit TIA-Portal oder WinCC ab. Die Modelle der Drives G-, V- und S120/S150 inklusive Safety werden von sf-ag dimensioniert, geplant, programmiert, parametriert und in Betrieb gesetzt. Damit eine kurze Inbetriebsetzung gewährleistet werden kann, verfügt sf-ag über ein mächtiges Simulationssystem.

simatool tool sets enable fast mounting and dismounting of roller bearings and radial shaft seals. They are used successfully throughout the world in the mechanical engineering industry, in maintenance workshops and practically all other branches of industry. The fast, safe precision handling of the tools is particularly valued. Compact, sturdy tool case All simatool tool sets are supplied in hard-shelled tool cases. These ensure the required protection of high-quality tools at all times. The compact tool cases allow easy use of the tools in any sector. User video on the Internet To ensure correct handling of simatool tools, simatec ag has provided informative and practical user videos at simatec.com www.youtube.com: Keyword: "simatool"

Despatched in 24 hours or less, Simple Select is perfect for applications where quick installation and fast delivery are paramount.

With our many years of expertise in using the leading simulation software Visual Components, we support you through every phase of your project. From the initial layout concept to detailed process simulation and virtual commissioning. It makes no difference whether you are planning a new plant (greenfield) or optimizing an existing one (brownfield).

Industry 4.0 means handling the ever-growing data volumes in production through networking and digitalization. Over the years, this has led to fundamental technological changes to data cables culminating in the new Single Pair Ethernet technology. What are the biggest changes? What are the most important benefits of the new C-track-capable SPE cables? Key facts about Single Pair Ethernet technology - Universality: Cabling and network standard, with which - e.g. sensors or actuators communicate and can be supplied with power in parallel by means of PoDL. - Standardization: Through its uniform cable structure and its standardized transfer protocols (TCP/IP), Single Pair Ethernet technology makes integration into existing networks much easier. - Space-saving and economic: Data and power are transferred via a single pair of wires - High compatibility: Extended application range thanks to easy integration into existing networks - Performance via a pair of wires

The good news is that the further development of Ethernet transmission technology and PoE power supply with currently up to 90 W also creates new applications with Ethernet interfaces. In addition, there is a growing need for uniform, lean transmission technology, both in terms of the transmission protocol and the hardware, connectors and cabling. Ideally, right down to the field level to the sensors and actuators. This should be possible with Single Pair Ethernet (SPE). With the start in the automotive industry, the technology begins to find its way into industry and, in the long term, into buildings. The SPE topic has been known for some time and since the SPS 2019 trade fair at the latest, it has made itself felt in all media. As an innovative manufacturer for high quality in the field of contact technology and connecting elements in the market segments of industrial electronics, data and communication technology as well as in building technology, we at METZ CONNECT also deal with single pair Ethernet technology. Be it in devices, control cabinets, systems or infrastructure, both in industry and in buildings. Based on market knowledge, we assume that the first SPE applications will develop in industry. METZ CONNECT begins the first step with premium membership in the Single Pair Ethernet Industrial Partner Network. We are one of more than 30 strong partners to support the IEC 63171-6 connectors. We look forward to actively working in the SPE Industrial Partner Network. In Single Pair Ethernet we see a groundbreaking technology for the development of further Ethernet-capable end devices, sensors and actuators, be it at the field level in industry or in smart buildings.

Our contribution as a member of the SPE network is to establish the SPE technology on the international market and to initiate new fields of application in the different industries. For this purpose SAB Bröckskes has developed a complete product range for various applications: CATLine SPE C-Track Single-Pair-Ethernet cable, suitable for cable tracks CATLine SPE Robot Single-Pair-Ethernet cable, suitable for robots CATLine SPE HT Single-Pair-Ethernet cable, high temperature resistant CATLine SPE Rugged Single-Pair-Ethernet cable for robust indoor and outdoor use CATLine SPE Rail Single-Pair-Ethernet cable for railway applications

Hybrid cable One Cable Solution OCS - Connected at a distance

Featuring all of the benefits of the GV3 system, SL2 is a corrosion resistant, stainless steel linear guide system for use in food and medical industries, or corrosive environments. Offers all of the inherent benefits of GV3 system – But with hardened stainless steel bearings and slides for any application requiring corrosion resistance. Corrosion resistance – Suitable for any application requiring corrosion resistance or for use in specialist environments including clean room, wash down and corrosive environments. A solution for challenging industries – SL2 is ideally suited for nuclear, food and beverage, medical, pharmaceutical, electronic, and scientific applications. Lubrication options – A range of special greases are available for use with food applications, in clean room environments or when performing under extreme temperatures or in a vacuum.

This complete kit, ready to assemble, allows the installation of a single handle on a drawer or door. It is supplied with installation instructions.

Efficient conveyor technology for complex conveyor layouts Robotunits' Slat Top Conveyors are built for flexibility – easily adapting to your layout and covering long distances with a single drive. Durable, dependable, and low-maintenance, they deliver smooth, efficient, performance for industrial and logistics applications.

Small solenoid in closed design for highest demands on mechanical life and precision. Available in pulling or pushing design and with return spring on request. Special designs are available.

By using our new micro injection molding machine, we are taking precision and repeatability in the production of small parts and rubber-metal composite parts to a new level for all types of elastomers. WHY CHOOSE MICRO FUNCTIONAL PARTS FROM KUBO? Decades of experience in toolmaking and internal production of elastomeric moulded parts Support in the development of your parts by a specialized and experienced engineering team comprising material, plastic, and mechanical engineers Effective/optimal implementation thanks to our in-house toolmaking Selection of the right rubber compound due to material expertise Precise manufacturing at our facility in Effretikon, Switzerland Reliable quality control through modern digital measurement technology High-quality products you can rely on SPECIFICATIONS From single pieces to mass production Complex moulded parts (multi-plate moulds) Smallest parts, e.g. O-rings with inner diameter Ø 1.5 mm and cord thickness of Ø 1 mm, valves with a diameter of 2.4 mm and height of 2.2 mm, vulcanization of a metal part onto a rubber part with a diameter of Ø 3 mm and a thickness of 0.4 mm High-precision injection volume Tolerances according to ISO 3302 manufacturing class M1 achievable for parts under 1 mm All common elastomers (NBR, EPDM, etc.) Processing of high-performance elastomers such as FFPM, FPM

The new sensor class for positioning and inspection tasks • Smart measurement toolbox • Web interface for easy parametrization • Precise up to 5 micron resolution • Smart connected - IO-Link / Ethernet / and much more. • 10 models for a wide range of objects