Exhibitor products

New value repair with 24 months warranty Secure the best service for the repair and overhaul of individual system components - our repair service. Each of our service experts is always at the cutting edge of drive technology and drive automation. We guarantee this through extensive product training. In this way, we always guarantee you the best quality, even with overhauled drives. That's why you receive a 24-month warranty on our new value repairs.

The software for programming the modules of the Gemnis series is available in the new Gemnis Studio version 12 which has a fully updated graphic layout and new programming functionality. With retractable side panels housing the sensors and function blocks, the field available for working in the programme is now larger and neater, with the option of choosing between light and dark display themes. The advanced menu groups the sensors according to electrical type so as to guide the programmer in choosing the correct sensor for the project. New function blocks with mathematical functions have been introduced which are very useful for applications with frequency inputs for speed control or with current inputs for analogue sensors. Another important new feature is the option of disabling the test pulses of the PNP safety outputs. The electronic safety outputs of the Gemnis modules are always protected and monitored for dangerous faults. In order to perform this monitoring, test impulses (i.e. very short switch-offs of the outputs) are created in the safety outputs while the outputs are active. These test impulses are generally undetectable on passive loads (contactors or similar); in rare cases, however, they can disturb the inputs of digital devices such as PLCs or electronic drives. With Gemnis Studio 12, it is possible to disable the test impulses of the PNP safety outputs in cases where the application requires it. Faults such as short-circuits to the external positive pole are still detectable when the outputs are switched off. The new Gemnis Studio 12 software is completely retro-compatible and capable of programming modules from previous generations equipped with Kernel 10 or 11. The new software incorporates a new remote support management system which allows you to receive help from Pizzato technical support directly from the Gemnis Studio software window with just a few clicks.

The NS series safety switches with solenoid and RFID technology, now come with the new mode 3 for safety output activation. In the versions with mode 1 the OS safety outputs are active when the actuator is both inserted and locked, so that the actuator cannot be extracted with safety outputs activated. Mode 2 allows the actuator to be released while keeping the safety chain enabled. Mode 3 combines the functions of modes 1 and 2: a safety output is active when the actuator is both inserted and locked, while the second safety output is active when the actuator is only inserted. This allows two single-channel independent circuits to be combined in a single device and to emulate traditional electromechanical interlocking devices with guard locking, without complex machine wiring modifications. The management of the two channels also includes the inputs, so that multiple devices can be connected in series.

NG series safety switches with RFID technology are now available with integrated buttons, for control and signalling functions. Buttons can be easily wired inside the switch through terminal blocks with a PUSH-IN spring connection. In order to meet the various needs of its customers, Pizzato Elettrica provides different configurations and combinations of control and signalling devices for the NG safety switch: buttons, signalling lights, emergency buttons, selectors, different contact blocks etc. Buttons can be illuminated in a fast and intuitive way through the internal terminals for wiring the LEDs. NG safety switches with control devices can be combined with the P-KUBE 2 handle to obtain a compact and solid metal body, incorporating an RFID safety switch with a pin for the centering of the door, an anti-panic release, an adjustable handle with a lock-out device to be closed with a padlock and a control console.

Design details fulfill specific requirements The Neugart NDF gearbox meets these special requirements with numerous technical details: For example, the gearbox enables extremely fast changes of direction thanks to a low-inertia clamping system at the input stage, which improves the dynamics and thus the cycle time of the robot. At the same time, the torsional backlash is limited to <1 arcmin as a standard feature. The gearbox with the frame size 090 operates with three specially designed planetary gears in the input stage and four in the output stage. This significantly increases the torsional stiffness and the transmittable torque. Four two-stage transmission ratios, each between i=22 and i=55, are available. The output of the NDF has also received special attention in order to optimally meet the specific requirements of a Delta robot: The gear ratio at the output is i=5.5, which allows transmission of very high torques. The flanged output shaft with torque interface has 12 threaded holes (M8 instead of the usual M6), the output flange has 16 holes (instead of the standard eight for each). The gearbox output shaft only rotates back and forth through a limited angle in Delta robots because of their design, making lubrication more difficult. An optimized radial shaft sealing ring in the NDF ensures optimum sealing of the shaft during rapid changes of direction. A food-grade oil lubrication system is available as an option for the NDF. As an additional option, the NDF can be equipped with a stainless steel output shaft and a nickel-plated output flange. These options increase the corrosion resistance of the gearbox. As a result, it also tolerates frequent cleaning with aggressive media, which is essential in the food and pharmaceutical industries.

With its new Touch Panel generation "Next Level HMI" Christ is breaking new ground. In terms of design and performance, we are launching the next level in machine and system operation. In doing so, we are already adopting proven features such as high flexibility and scalability for our standard products. Combined with a modern look and expansion stages from monitor to high performance Touch Panel PCs, you get completely new possibilities for your HMI solution.

The planetary gearbox for AGVs. Compact and highliy resilient. Whatever the demands that you make of your AGV drive: we can provide you with the ideal gearbox solution for your vehicle. Every detail counts, so that a gearbox can fulfill application-specific requirements in an optimum way. AGVs are designed to transport heavy loads on a continuous basis. The specific structural and mechanical demands are extremely high. However, we fulfill them in a reliable way with our NGV planetary gearboxes. Because the gearboxes impress with their compact design, efficiency and durability. And we have specifically optimized them for use in AGVs.

NIMU is a reusable, non-invasive detection system. After an overpressure event, and the associated opening of the rupture disc, the outlet part of the rupture disc holder must be removed, the rupture disc replaced, and afterwards the system can be put back into operation. The days when the signalling cables also had to be routed again to the respective switching box are finally over.

The CTP‑BI is based on the proven principle of the safety switch CTP and has an additional bistable locking function.

With the new generation of planetary servo geared motors, STOBER has developed drive solutions that are the most compact on the market in terms of versatility! Benefit from a 65% increase in power density and – by leaving out a motor adapter – get the most out of the dynamics of your drive.

NORD produces three geared motor series with high output torques and high efficiency for a wide variety of applications in more than 100 industries.

The new and energy-efficient UNIVERSAL motor from NORD DRIVESYSTEMS extends the motor portfolio for the most important world markets such as Europe, USA, Canada, China or Russia. It has the CE, UL, CSA, CCC, EAC, ISI and UA certifications and is available with a power range from 0.12 to 45 kW. As standard, the UNIVERSAL motor is equipped with a temperature sensor (TF).

The NORDAC PRO is a frequency inverter for all drive applications. Even in the basic SK 500P version, the NORDAC PRO provides great versatility. The advanced SK 530P version extends this scope and can be functionally extended with optional SK CU5 modules. The SK 550P has an integrated multi-protocol Ethernet interface for efficient connection to Ethernet-based control systems. Easy operation of the NORDAC PRO is achieved with a Bluetooth interface, an SD memory card as the storage medium for parameters, firmware and operating data, as well as a USB interface which enables parameterisation of the inverter “in the box”. Use of the latest components enables a very compact design and therefore space-saving installation.

The mobile commissioning and service solution for all NORD drives Dashboard-based visualization for drive monitoring and fault diagnosis; Parameterization with help function and parameter quick access; Oscilloscope function for drive analysis individually configurable; Backup and recovery function for easy handling of drive parameters