Exhibitor products

Rexroth ball screws open up a variety of options for the designer to solve transport and positioning tasks with a driven spindle or a driven nut. Regardless of whether it is the highest linear speeds, maximum load ratings or minimum lengths, there is always the optimal solution.

The SOMA precision medium pump (PMP) offers standard, intelligent pressure relief when supplying lubricants in industrial production processes. Based on the scoop piston principle with a very low transmission ratio, the SOMA PMP precision medium pump gently supplies your lubricant application with medium. The special follower plate geometry ensures fast venting with very low losses. A safety PLC in accordance with the Machinery Directive and a digital interface to a higher-level control system provides a safe and controllable process at all times.

The precision Z stage Type SMH consists of 3 Slide parts with a dovetail profile. The wedge-shaped interior part enables height strokes of 1.0 - 20.0 mm as standard. Micrometer knurl, handwheel or ball cranks can be used for adjustment. For example, you can adjust assembly units or measurement setups. On request different special versions are possible, please contact us.

PRECISE AND BACKLASH FREE: R+W PRECISION COUPLINGS High performance motion systems can place challenging demands on connecting elements like shaft couplings. Among other things, they need to withstand dynamic motion and large variations in drive torque while transferring rotation precisely. Couplings are also commonly asked to protect other system components from vibration and torque overload. Beyond this is the trend toward increasingly compact sizes and energy efficient drive components: Transmissions in particular are becoming smaller since compact machines with lighter components save money. To this end, the use of precision couplings over other traditional coupling types can be advantageous, due in part to their superior torque density. As an expert manufacturer of precision couplings, R+W can provide solutions for just about any application, harmonizing requirements for high speed and high precision in motion transfer. Companies operate their systems with assurance of process reliability and efficiency when it comes to their use of R+W precision couplings. R+W offers a wide variety of precision coupling products, ranging from off the shelf standard items to fully customized units, based on collaboration with the customer from concept to delivery.

Know today what will happen tomorrow: Thanks to Condition Monitoring and Predictive Maintenance with DriveRadar®, you can integrate components, machines, plants, and entire factories into a digital network that transcends the boundaries of individual companies. This allows you to respond proactively to any changes.

Let us surprise you! We will be presenting the new flexiPRESS max at the trade fair. With this servo press solution, we are expanding our press capabilities to a feed force of 355kN (35 tons). Highlights: - 355kN or 35 tons of press force - Robust planetary roller electric actuator as the core - Functions and possibilities of the proven ecoPRESS - many press functions including envelope curve and FastTask - High-resolution force sensor - Customer-specific adaptations possible at any time - Ideal for any press application, whether a new project or a replacement hydraulic press - incl. commissioning and training on site Find out more at the trade fair ;-)

The impact-resistant innovation with high-performance membrane. The clever, compact and innovative solution prevents pressure differences, temperature fluctuations and condensation in electrical and electronic housings. AGRO’s new, innovative pressure balance element facilitates quick and reliable air exchange and ensures the housing stays dry inside. Whether traffic control and signalling technology, street lighting, railway vehicles, distributor housings for energy distribution, or solar energy systems: they must all withstand wind and weather, heat and rain. The same applies to their electronics and electrics. Air pressure, temperature and humidity are constantly changing. Sealed housings are never completely sealed. Many electrotechnical housings are watertight and dust-tight (IP 68) but not gas-tight. Changing temperatures can thus produce a pressure difference, causing air exchange. This leads to condensation, which can result in corrosion and defects/malfunctions. This is prevented by installing AGRO pressure balance elements. AGRO has developed a new, innovative pressure balance element of A4 stainless steel (EN 1.4404 / AISI 316L) for use in stainless housings (patent pending), which is unsurpassed in terms of robustness and offers the highest impact resistance in accordance with IEC EN 62262, Class IK10. High-quality materials combined with innovative design A high-performance membrane ensures rapid, reliable air exchange with outstanding flow rates. It is made of PTFE (polyterafluoroethylene) and has pores that are bigger than water vapour molecules but smaller than water droplets. The water- and oil-repellent membrane offers a very high degree of protection: IP66 / IP68 (0.5bar/1h) / IP69 / IP6K9K. The wide temperature range, from -40 °C to +150 °C, is another highlight of the new pressure balance element. The product features an M12x1.5 entry thread. The membrane is RoHS- and REACH-compliant, and free of PFOA and PFOS.

As a result of warming, from either the sun’s radiation or the enclosed electronics, pressure differences develop between the housing and its surrounding environment, which result in the transfer of air from one to the other. Air drawn into the housing carries moisture, which condenses when the temperature drops below the dew point. The water which is now trapped in the enclosure can lead to corrosion and equipment failures. To prevent pressure differences, high humidity and condensation of water in the housing, constant balancing of pressure and Exchange of air is needed. The use of AGRO pressure balance elements in electrical and electronics housings allows efficient pressure balance and ventilation, and if necessary, drainage. A new pressure balance element for increased safety Ex e II with membrane is now available.

To achieve good dosing results that are reproducible, the pressure of the medium to be dosed (grease, oil or technical lubricants) must be limited upstream of the dosing valves to the optimum maximum pressure for the relevant application. The patented SOMA pressure balance system DAS 120/12 ensures, up to a maximum inlet pressure of 250 bar, that the medium pressure set on the outlet side is available to the dosing valves at a constant level and without pressure fluctuations. It is therefore predestined for use in supply systems for highly viscous media with low and medium pressure pumps.

The PRO series is the result of our many years of experience in the display and embedded sectors and combines the latest features in an extremely robust and compact monitor series. The ultra-flat design and the integrated 10-finger PCAP touchscreen create an elegant, versatile all-rounder. The POS-RP-PRO monitors are controlled via the FORTEC-Artista-IoT TFT controller, which is based on the Raspberry Pi with the CM3+ compute module. Users can use this to easily program their own applications or use one of the numerous operating systems supported by Raspberry Pi. The panel PCs in the POS-IQ-PRO series are based on a powerful Intel® x86 Pentium® CPU and support a wide voltage input range from 12 to 24 volts. They have the interfaces 2x Gigabit Ethernet, 4x USB 3.0, HDMI, DisplayPort and RS-232/422/485, as well as 4 GB RAM and an SSD for industrial use with 64 GB storage. Now also available with Android 13 OS. The PRO devices are encased in an ultra-flat housing made of polished stainless steel, which offers front-facing IP65 protection against dust and jet water. This means they can easily withstand the high demands of harsh industrial environments. Our reference can be equipped with many innovative options such as hover touch or gesture control. The four basic variants of the PRO monitors are available in sizes from 7" to 15.6" (17.78 to 39.62 cm) and offer you an optimal solution for every application area - ready to connect and CE-certified.

Flexible, functional and attractive - these are the features that characterize the new proboxx range of enclosures from GEORG SCHLEGEL GmbH & Co. KG from Dürmentingen. With this new product line, the control unit specialist is expanding its enclosure portfolio with a particularly elegant and practical variant that makes everyday work easier.

Our process control system modules such as recipe, alarming, energy recording, user management, etc. extend your existing process control system based on your requirements. Visit the link below for a project example of "New process control system optimizes workflows in the packaging industry" 🔗 https://www.imt.ch/en/projekte-detail/process-control-system-for-the-packaging-industry

Successfully launching a new product as a startup is like an adventure full of challenges. At IMT, we know this because we have also developed our own innovative devices and marketed them worldwide. Trust us as your competent partner in high-tech product development. We are happy to support you from conception to worldwide approval to accelerate your time to market. - From the idea to the concept - Concept validation & development roadmap - Product industrialization - Evaluation of components & suppliers - Regulatory approvals & device registrations - Design transfer for series production Learn more: 🔗 https://www.imt.ch/en/startup-services

Everything from a single source and Made in Switzerland. From development to the finished product, Computechnic offers the entire process in-house.

Book work steps, record set-up and production times, book rejects, display parts lists - our PDA is the easiest start to a paperless production! SETAGO® production data acquisition (PDA) controls and documents the entire production process on the shop floor. It provides the workers with the information they need at every stage of production and simultaneously records all relevant key figures. All production data is available digitally, including parts lists, construction plans and other important documents. The PDA not only supports production, but also enables the recording of set-up and production times as well as quantities of material. The current status of each production order can be viewed at any time, allowing easy comparison with the target times. Optionally, an e-paper label can be used to label the material and reduce paper consumption in production. Why you should choose our production data acquisition system: - Cost-effective - Simple - E-paper connection - Increased productivity - Reduction of production errors - Paperless processes with live data